Light up your ride with the all NEW Mini Deluxe LED!
The Deluxe LED version now has an adjustable handlebar allowing the scooter to fit your child at each stage of growth. At its highest point, it sits about an inch higher than the Mini Original, meaning you can get more life out of your ride! Also featuring a new anodized stem, anti-slip silicone footplate and superior rear brake. And don’t forget the light-up wheels! Our LED Wheels are motion activated with no batteries required.
An original proprietor of the lean-to-steer design, we have seen it all when it comes to scooter engineering and fully recommend the lean-to-steer method as the safest and most fun way for kids to ride. The T-bar provides stability as children steer by using their body weight to lean right or left. This intuitive way of steering limits jerky turns and develops essential balance and coordination skills.
An original proprietor of the lean-to-steer design, we have seen it all when it comes to scooter engineering and fully recommend the lean-to-steer method as the safest and most fun way for kids to ride. The T-bar provides stability as children steer by using their body weight to lean right or left. This intuitive way of steering limits jerky turns and develops essential balance and coordination skills.
SAFETY - For best protection, we strongly recommend that children wear helmets and knee pads when riding. Non marking wheels allow children to learn to scoot in the safety of your home.
Note: We are unable to sell LED wheels as a separate part at this time.
-
Age : 2 - 5 years
-
Capacity : 110 lbs
-
Scooter Weight : 4.2 lbs
-
Dimensions Folded : T-bar removes from deck
-
Height from Deck : 25" from Deck
-
Wheel Width : Front: 120 mm, Back: 80 mm, Polyurethane
-
Scooter Width : 21" x 4.5"
-
Wheels : 3
-
Steering : None
-
Deck Size : 12" x 4.5"
Returns Policy: Only new, un-used products may be returned within thirty (30) days of delivery for a full refund of the net cost of the goods. The cost of expedited shipping originally paid is not refundable. Except in cases of a warranty claim or manufacturing defect, return shipping cost is the responsibility of the buyer, whether returning or exchanging. Please refrain from unpacking and/or assembling products if there is possibility of return for personal reasons. We do accept returns of very lightly used and/or assembled bikes, but all returns must be in exact new condition and shipped in the original packaging in which they were received, with proper use of protection materials originally provided. At our discretion, returned products exhibiting outdoor use or minor cosmetic defects will be assessed a restocking fee of not less than 20%. Poorly packaged returns in which there is metal to metal contact while in transit will not reach us in perfect condition!- If successful re-packaging by the buyer is not possible, a professional packing service should be hired to perform correct re-packaging.
Assembly: Our bikes have been engineered to safely perform when correctly assembled by the buyer or by a skilled bicycle technician in a bicycle shop. If buyer/recipient's technical skill is not sufficient to successfully perform assembly, the balance bike should be taken to a local bike shop for professional assembly. The cost of this service is not included in the purchase of our bikes. Most buyers successfully self-assemble bikes in 5-10 minutes and this process usually consists of attaching front wheel using a wrench, and inserting/fastening handlebars using an allen wrench. Basic assembly tools are provided with most bikes. Keep all packing/protection materials out of the reach of children and dispose of properly. Protective plastic forms are sometimes used to protect your bike from damage while in transit. If these pieces are broken it is completely normal, it means they did their job! Most packing materials and cartons are recyclable.
Break-in Period: The moving parts of our balance bikes have been lubricated and professionally set at the factory. The bearings in the wheels and frame are adjusted such that a certain amount of break-in is necessary for optimal performance. Our bikes are sometimes stored in an unheated warehouse and this causes lubricants to harden temporarily. An initial break-in period of 5-6 hours (riding time) will loosen all lubrication, and bearings will perform exactly as required. Early stiffness of wheels or other moving parts is not considered to be a defect.
Valve Stem Caps: Plastic valve stem caps are not provided on a few of our balance bike tires because they pose a choking/suction hazard to the bike recipient and to younger members of the household. Valve stem caps are not designed to retain air. For this reason and for the safety of children, they are not provided with Scoot, TooToo [and other] balance bikes. This is not a deficiency, it is for the safety of children. We strongly recommend disposing of valve caps on bikes so equipped.
Tolerances: Production of 12" bicycle wheels is very difficult due to their very small radius. (The wheel rim starts out as a straight piece of extruded metal) For this reason, it is not possible to always produce exactly round and true balance bike wheels. For balance bike wheels, a small amount of lateral dance is acceptable, does not affect performance, and is not considered to be a defect. Some of our brands (Ridgeback Scoot, Yedoo TooToo, go through a special bench prep process to inflate the tires, true the rear wheel and tune the rear brakes (if so equipped).
Legal Disclaimer: By purchasing this product, buyer/recipient/user acknowledges and agrees that cycling is an inherently dangerous sport, and assumes all risk and responsibility for any and all consequences of accidental mishaps, including injury and death. Please supervise children at all times while using this product. Children should always wear an ANSI approved helmet and wear rubber soled shoes. Avoid steeply inclined areas where excessive speed may result. Ride only in places where motor vehicles are not allowed. (sidewalks, parks, bike paths) Professional assembly, periodic service and maintenance is the responsibility of the buyer/recipient. Inspect tires, brakes and fasteners before every ride. Repair/replacement of parts exhibiting excessive wear is the buyers/recipient's responsibility.
